|
|
Lane Width |
Enter the width
of the auxiliary lane to be inserted |
|
Taper in
Length |
Enter the
length of the lead in taper |
|
Start
Chainage |
Enter the start
chainage of the auxiliary lane to be inserted
after the lead in taper. |
|
End Chainage |
Enter the end
chainage of the auxiliary lane to be inserted
before the lead out taper. |
|
Taper out
Length |
Enter the
length of the lead out taper |
|
Templates |
Enter the
template names you want to use on the tapers and
auxiliary lane. Select the "No Change" option to
prevent a template change. |
|
Lane
Settings |
Indicate the
lane to which the auxiliary lane should be added. |
In this example we are going to add an auxiliary lane
between chainage 100 to chainage 150.
Click OK to add the
auxiliary lane.
The auxiliary lane is shown.
For Dual Carriageway Roads:
There are 2 dialogs, depending on the lane settings.
|
Lane Width |
Enter the width of the auxiliary lane to
be inserted |
|
Taper in Length |
Enter the length of the lead in taper |
|
Start Chainage |
Enter the start chainage of the auxiliary
lane to be inserted after the lead in taper. |
|
End Chainage |
Enter the end chainage of the auxiliary
lane to be inserted before the lead out taper. |
|
Taper out Length |
Enter the length of the lead out taper |
|
Templates |
Enter the template names you want to use
on the tapers and auxiliary lane. Select the "No Change" option to prevent a
template change. |
|
Lane Settings (Shoulder Side, Median
Side) |
Indicate whether the auxiliary lane
should be applied on the shoulder, or on the median of the dual carriageway
road. |
|
Lane Settings (Left Side, Right Side) |
Indicate to which lane the auxiliary lane
should be added. |
Adding the Auxiliary Lane (Graphically).
Alignment Menu › Edge Levels › Edit Super
Right click on the window to get the following dialog.
Select Add Auxiliary lane
Civil Designer will prompt :
Indicate the start of the lane.
Civil Designer will prompt:
Indicate the end of the lane. Once the end position has been indicated, you will
be presented with the Add Auxiliary Lane dialog, allowing finer adjustments.
Note the Start and End chainages indicate the graphical indicated positions.
Click OK
The display will be updated to show the new lane.
| 
